Prove That You Can Repair a Small Engine by Getting More Than 30 Right on This Quiz!


By: Dave Davis

7 Min Quiz

Image: Pexels by Skitterphoto

About This Quiz

There are two kinds of people in the world: Those who have to call someone when the lawnmower doesn't start and those who roll up their sleeves and are about to get up to their elbows in lawnmower parts. Small engines are simpler than their automotive cousins, but it doesn't mean that they're simple. Do you have what it takes to avoid trips to the repair shop when something goes sideways with your lawn and garden equipment? This quiz separates the weekend tinkerers from the hardcore doers

It can take more than a green thumb to get the best out of your landscaping; sometimes, you need to get your hands black with oil and grease. Mowers, tillers, chain saws, gas trimmers and other power equipment get exposed to the elements, are often handled roughly and are put down into the grass and dirt regularly — it's their job, after all. They occasionally need more than just regular maintenance. Are you up to the task of keeping multiple engines running smoothly?

If you can get more than 30 of these 35 questions correct, you'll prove that you know your way around the two-stroke engine of your lawn equipment or the small four-stroke engine of your lawnmower. You'll also get calls from your friends when their equipment isn't running right, but that's OK; you probably enjoy working on the engines more than you like digging in the dirt anyway. Hop off the riding mower (or put down the snowblower, depending on the season), and test your knowledge of the small engines that make your life easier!

Which of these problems is often overlooked, easy to fix and can drastically improve engine performance when corrected?

The air filter is a critical piece of your small engine — all air coming in for combustion passes through it — and if it's dirty, your engine can't breathe right. Take a few moments to regularly check to see if it needs cleaning or replacement. Your engine will thank you!


What is usually the easiest way to tell if your small engine has "flooded"?

When the engine is over-primed, the choke is improperly set or another problem puts too much fuel in the system, the engine becomes "flooded" and won't start. If you remove the spark plug and find that it's wet, that's your problem. Let the cylinder dry out and try it again.


Mechanics know that the acronym "F.A.S.T." is the guide for troubleshooting a troublesome engine. What does the "S" stand for?

Internal combustion engines need four things to operate: Fuel, Air, Spark and Timing. By remembering the acronym "F.A.S.T.," you can narrow down the problem quicker, arrive at the correct fix and become the hero!


You go to prime your engine and notice that the primer bulb is cracked. What should you do?

The rubber bulb you use to prime the engine when you get ready to start it can crack or be torn over time, causing it to leak fuel and unable to do its job. It's best to replace it; otherwise, it won't be able to form the seal it needs to draw gas from the tank.


You notice there's some fuel leaking from the area under the carburetor. What might be causing this?

Over time, the carburetor bowl gasket might dry out and crack — or in some cases, fall off completely. Check this gasket and others around the carburetor and you'll probably find the missing or damaged piece of the puzzle.


Which of these is a common fuel-to-oil ratio when it comes to two-stroke engines?

Two-stroke engines — the kind used in smaller engines — require the user to mix oil in with the gasoline, typically at a 40:1 or 50:1 ratio of gas to oil. This means that, for each gallon of gas, about 3.2 ounces of two-cycle engine oil needs to be mixed in.


Which piece of equipment is invaluable for mechanics who need to see if electricity is flowing when it should be?

A multimeter looks intimidating to those who aren't familiar with the tool, but in the hands of someone who knows how to use it, it can save a lot of time and struggle. By finding dead or undercharged circuits, a multimeter is one of the best diagnostic tools of a mechanic.


You pull the cord to start the lawnmower and, snap; you're left holding a broken cord. What's the first step in repairing this?

The FIRST first step, of course, is to cool off before making the repair (that's a very frustrating thing that's just happened!). Putting a new starter cord on is actually pretty simple, and the first step is to remove the rewind assembly, which is where the cord attaches.


Which of these is NOT part of a regular "tune up" maintenance routine?

Just as regular maintenance is necessary for your car, your small engines need some TLC as well. The oil needs to be changed, filters need to be cleaned and the spark plug needs to be kept in good working order. There's no worse feeling than pulling the start cord and ... nothing.


You pull the cord and nothing happens. Pull it again; same thing. After a few tries, what's the first thing to check?

It might sound like dumb advice, but you'll save yourself a lot of headaches if you start out chasing horses and not zebras. The engine won't run without gas in the tank, and that's the easiest thing to check when there's a problem. If there's fuel, then move along down the troubleshooting line.


What is the functional difference between a two-stroke and four-stroke engine?

Two- and four-stroke engines are similar (they are both internal combustion motors), but they achieve this by slightly different means. The combustion process consists of the intake of air and fuel, compressing that mix, igniting that mix and doing away with exhaust gases. Four-stroke engines perform this process in four independent stages; two-stroke engines just use the upward and downward strokes.


When using a tiller or lawnmower, which of these steps should be part of basic maintenance each season?

If you take care of your tools now, they'll take care of you down the road (thanks, Dad!). The oil is vital to the engine's well-being, the machine should be kept clean to avoid dirt getting into the engine, and the blades should be sharpened for better results and an easier load on the engine.


When checking the condition of a lawnmower blade, what's the first thing to do?

Without a spark, the lawnmower's engine will not run, and you do not want the engine even capable of running when you're dealing with the blade. Unplugging the spark plug from the spark plug wire is the easiest, surest way of keeping all your fingers where they belong.


Which of these problems can result from leaving gas in the engine without running it for too long?

If you leave gas — especially untreated gas — in the system over the off-season, you might have trouble starting it when it comes time to mow the lawn or blow snow off the driveway. Time to get your hands dirty to clean the carburetor!


This part is designed to mix fuel and air into a combustible form for the engine. Can you name the part?

While they've fallen out of favor in automobiles thanks to the fuel injector, most small engines still use a carburetor to combine fuel and air into a mixture that can be used by the internal combustion engine. If your engine isn't getting enough fuel, this is one of the first things to check.


Your engine is producing white or white-blue smoke when it's running. What's the deal?

White or white-blue smoke means that oil is being burned within your engine. This could mean something simple (the crankcase is overfilled with oil or the engine was on its side during storage) or something more complex (the head gasket is blown). The smoke is a clue to point you in the right direction.


Which of these is a good diagnostic activity to see if there's a fuel problem with an engine that won't start?

If you suspect your small engine isn't getting enough (or any) fuel, take an aerosol petroleum-based lubricant ("petroleum-based" is the key here), take off the air filter and spray into the carburetor throat. If it starts (it'll die soon after), it's a fuel problem.


Which of these is the proper spark plug gap for small engines?

The gap between the electrodes of a spark plug (the gap the spark travels) varies depending on the engine, but if it's not gapped correctly, the engine will run rough if it runs at all. Check the manual to see what the proper gap should be.


For small engines with batteries, what might be the cause of a battery that keeps draining?

The voltage regulator is responsible for sending the correct amount of energy to the battery from the alternator to keep it charged. If this part doesn't function properly, the battery will be drained faster than recharged.


Which of the following statements is true about two-stroke and four-stroke engines?

Four-stroke engines are more complex and heavier than their two-stroke cousins, but they are also more fuel-efficient and quieter. The two-stroke is often found in simpler lawn and garden equipment, while four-stroke engines are the more heavy-duty players.


When repairing a gasket, which of the following is true?

Gaskets will show signs of wear through leaks, burn marks and other telltale signs. When replacing a gasket (they can't be salvaged), it's important to get ALL the old gasket off the mounting surface before putting the new one on. Take your time and use a gasket scraper so you'll get a clean seal with the new one.


What does it mean when your engine is producing black smoke while running?

When your engine is producing black smoke while running, there's a problem with the fuel system. Causes could be a dirty air filter (resulting in too much fuel in the air/fuel mix), bad fuel, a flooded or dirty carburetor, or something else in the system.


The darned thing won't start. It's got gas and you've changed out the spark plug and still ... nothing. What's the next step?

If the engine isn't even threatening to start, you've checked that there's gas in the tank and the spark plug is in good condition, the culprit might be the ignition coil (it sends voltage to the plug for the spark). An ignition coil tester will let you know if you've found the problem.


If your lawnmower suddenly loses power or speed but keeps running, what could this be a sign of?

If the engine keeps running, but the lawnmower loses power or cutting ability, the answer could lie with the drive belt. Once the mower is off (and the spark plug wire is detached), check to see if the belt is dislocated or broken.


How fast does untreated gas go bad?

Because of oxygenation, gasoline will degrade over time, and the longer it's been sitting in its can, the more combustibility it loses. When stored in a tightly sealed container, gasoline stays viable from three to six months.


When you pull the cord to start your lawnmower, there's no resistance and you land on your rear. What's the problem?

When you pull the starter line, you're activating the recoil starter, and if there's a problem with it, there will either be no resistance on the line or too much of it. Either way, that engine isn't starting until you repair or replace the recoil starter. Good luck!


How often should you replace the spark plug on your small engine?

Spark plugs are cheap, usually easy to replace and can take a lot of abuse during the operation of a small engine. During annual maintenance (you DO perform annual maintenance, correct?), go ahead and swap out the old for new — it'll be one less thing to worry about.


Which of these devices can cause "vapor lock" in a small engine?

The gas cap has a small air vent that refills the volume in the tank when fuel leaves it, avoiding a vacuum in the container. If this vent gets clogged, the gas won't be able to leave the tank and will starve the engine of fuel, which is known as "vapor locking." If slightly loosening the cap allows the engine to run again, the vent is stopped up.


Which of these parts often causes no end of problems for people unfamiliar with a two-stroke engine when starting it?

The choke has caused a lot of damage to engines over the years thanks to their frustrated owners slamming the tool down because they can't get it started. When starting a cold two-stroke engine, the choke should be closed to limit the air being sent to the engine for a more fuel-rich mix. Once it's running and warmed up, open the choke to balance the mix and get to work.


You release the stop cable bar (or the "deadman's" bar) and the lawnmower doesn't stop. What's the most likely culprit?

The stop bar is designed only to allow the engine to start when the bar is pressed against the main handle, and to stop the engine when released. If the engine doesn't stop, it probably means the stop cable has become stretched over time. It needs to be readjusted or replaced.


The engine starts, but it backfires, vibrates, puts out heavy exhaust fumes and is generally very rude. What gives?

If the engine is idling roughly, putting out a lot of exhaust, vibrating, or popping and is generally a pain in the rear to use, the problem could be worn, burnt or bent valves. Replacing valves is a tricky repair for DIYers, but you'll at least know what you're dealing with.


Which of these tests will tell you if you're losing compression in the cylinder?

If your cylinder isn't getting good compression in the combustion chamber, your engine won't run well (or, if it's bad, at all). A leak down test will tell you if your engine is getting proper compression in the cylinder.


Which of these systems is usually the most reliable part of the engine?

The ignition module on most small engines is electric and doesn't have moving parts — therefore, it's the least likely to cause problems when the engine doesn't operate properly. That's not to say that it can never go bad; it just usually not the first place to start when there's a problem getting a spark.


Which of these parts is designed to protect the engine in case of a sudden stop?

The flywheel key is a piece of metal that connects the crankshaft to the flywheel. If the engine comes to a sudden stop, this piece will break, protecting the engine. The engine won't run without this brave, self-sacrificing piece of machinery.


It's worth keeping in mind! About how many people are injured each year in lawn mower accidents?

According to the American Academy of Pediatrics, about 250,000 people are injured by lawnmower each year, and in 2014, 100 people were killed. Not all these people were hurt repairing their equipment, but it's worth noting that, when you're working on or with small engines, a lapse in attention can be costly.


Explore More Quizzes

About Autoversed

Welcome to Autoversed: your online auto destination. If you consider a vehicle more than just means of transportation; if you treat your ride with love and care; if, even after years of driving, the feeling of accelerating hard on the open road still gets you revved up – you’ve come to the right place.

Whether you’re a daily commuter looking for a reliable ride, a car enthusiast thinking about your next hot rod, or a parent who needs to get the kids from A to Z, Autoversed has something for you. We’ve got the lowdown on hot exotic rides, pricy luxury vehicles, eco-friendly green machines, rugged off-roaders, and more. Come take a look!